10+ YEARS OF EXPERIENCE
ANTENG Excavator Mounted Vibro Hammer
Leading solution provider for piling equipment.
The first manufacturer of side grip vibro hammer in China.
Obtained 46 inventions and patents, certificated by ISO9001, ISO14001 CE.
Export to more than 60 countries and areas
Principle of vibratory hammer pile driver
The centrifugal force is produced by eccentric block vibration. The eccentric blocks appear in pairs, opposite rotation direction, the transverse centrifugal forces counteract each other, and the vertical centrifugal forces are superimposed.
High-frequency vibration makes the soil liquefy instantly, and then the pile is inserted into the soil through hammer weight or excavator pressure.
| Data/Model | V150 | V250 | V300 | V350 | V400 | V450 | V500 | V550 | V600 |
| Max Centrifugal Force (KN) | 287 | 333 | 385 | 431 | 461 | 501 | 534 | 574 | 607 |
| Excavator Weight (T) | 10-15 | 20-25 | 25-30 | 30-35 | 35-40 | 40-45 | 45-50 | 50-60 | 60-65 |
| Data/Model | Max Centrifugal Force (KN | Excavator Weight (T) |
| V150 | 287 | 10-15 |
| V250 | 333 | 20-25 |
| V300 | 385 | 25-30 |
| V350 | 446 | 30-35 |
| V400 | 483 | 35-40 |
| V450 | 532 | 40-45 |
| V500 | 565 | 45-50 |
| V550 | 595 | 50-60 |
| V600 | 670 | 60-65 |
| Data/Model | AT45B | AT55B | AT65B | AT75B |
| Max Centrifugal Force (KN) | 455 | 545 | 645 | 767 |
| Excavator Weight (T) | 20-25 | 25-32 | 32-40 | 40-50 |
| Data/Model | Max Centrifugal Force (KN) | Excavator Weight (T) |
| AT45B | 455 | 20-25 |
| AT55B | 545 | 25-32 |
| AT65B | 645 | 32-40 |
| AT75B | 767 | 40-50 |
- The excavator-mounted vibratory hammer uses the power from an excavator, and it can move quickly by the excavator walking system.
- The vibratory hammer can not only drive but also extract a pile. It is applicable for temporary protection works.
- Fully hydraulic flexible control. can pick up pile itself
- Precise design, reliable performance
- Famous brands’ core components
- Circulating cooling, no high-temperature troubles.
- Available for a wide range of piles including sheet piles, H-piles, tubular steel piles, timber piles, etc.
Working video
Side grip vibro hammer driver sheet pile
Side grip vibro hammer working indoor
Top grip vibro hammer piling sheet pile
Side grip vibro hammer working under bridge
Vibro hammer extracting sheet pile
Excavator vibro hammer drive solar pile
Sheet pile driver
Sheet pile is called Larssen pile also, it’s widely used as revetment, retaining walls and embankment revetments.
The steel sheet pile is driven into the soil layer by the sheet pile driver. Then necessary support or tension anchor is set to resist the earth pressure and water pressure and maintain the stability of the surrounding stratum.
It is fast, efficient and environmental by using steel sheet piles as retaining construction.
There are many types of construction equipment for steel sheet pile. But the excavator pile driver is the mainstream, efficient and flexible one.
Dock pile driver
Yacht dock can use timber, concrete, steel and composite material piles. Excavator pile driver can pile all of them.
The excavator pile driver can work on water by a loading boat.
Excavator vibratory hammer is excellent for small construction works such as yacht dock piling.
Solar pile driver
Excavator pile driver can install different clamps for different piles.
Both side grip and top grip excavator pile driver can drive solar pile.
Steel tube pile driver
Side grip excavator pile driver is applicable for steel tube pile with diameter 180mm~630mm.
Any Doubt Please Inquriy Us
Cooperative Partner
